ALYA AWP 300

31

ALYA AWP 300

DESCRIPTION

It is an elastomeric acrylic copolymer emulsion based, high quality, very elastic, liquid plastic coating developed for waterproofing.

DRYING TIME

  • (at 20 °C, at 65% RH)
  • Second coat application6 Houts
  • Final drying7 Days
  • Full strength14 Days
  • (drying time may vary in case of changes in temperature and relative humidity)
ALYA AWP 300

PROPERTIES

• It shows excellent adhesion to surfaces applied on %200 elastic feature.

• Maintains elasticity in hot and cold weather conditions.

• It has breathing feature, which allows the moisture on the surface to be released.

• It has high chemical and UV resistance. Applied as waterproofing.

APPLICATION SURFACES

Concrete, Plaster, brick, aerated concrete, wood, corrugated and non-corrugated roofing materials.

APPLICATION

• Before applying the ALYA AWP 300 Coating, the surface  must  be  completely  cleaned  of anti-adhesive substances such as oil, dust and sand.

• When necessary, holes and cracks on the surface should be treated with suitable material.

• ALYA AWP 300 Coating shall be thinned with %40 water and applied as 1 coat of primer.

• After the primer dry, ALYA AWP 300 Coating should be applied without diluting 3-2 layers and each layer should be applied in the opposite direction of the previous layer.

• Wait at least 6 hours between each layer.

• Surfaces with Water Based Liquid Coating should be protected from rain, snow and frost for 24 hours.

• A protective coating should be applied on the surfaces that will be visited and exposed to mechanical impacts.

• ALYA AWP 300 Coating gains water impermeability within 7 days, and reach final strength within 14 days.

• If the application surface will be exposed to pedestrian traffic, the application with mesh should be implemented in 3 layers, the mesh should be applied on the 2nd layer. The mesh should be well filled into the pores with a roller or brush and there should be no clotting on the surface.

• ALYA AWP 300 Coating is not suitable for surfaces exposed to pressurized water.

1st coat should be thinned with %40 water, 2nd and 3rd coats should be applied undiluted.

Depending on the type, absorbency and structure of the surface to be applied on, :

1.00-0.75 kg/m1 ²st coat. 2.0-1.5 kg/m2 ²nd coat.

It is 2.5-2.0 kg/m² for 3rd coat.

It can be stored for 2 years in its unopened package, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the package in an airtight way immediately after use.

• Harmful by inhalation, in contact with skin and if swallowed.

• Keep out of reach of children.

• Keep container tightly closed.

• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

• If swallowed, seek medical advice immediately and show container or label.