ALYA PRIMER COLORED

44

ALYA PRIMER COLORED

DESCRIPTION

It is acrylic emulsion water based primer, colored, matt. Applied for the interior and exterior purposes.

DRYING TIME

  • (at 20 °C, at 65% RH)
  • Touch dry time1 Hours
  • Application4 Hours
  • Hard Dry24 Hours
  • (drying time may vary in case of changes in temperature and relative humidity)
ALYA PRIMER COLORED

PROPERTIES

• It penetrates the surface very well.

• It connects the topcoat paint to the surface, by preparing a strong surface.

• Reduces the paint consumption and reduces the water absorbency of the plasters.

• Has a high adhesion performance in water-based materials and wall putty applications, it also have alkali, water and weather resistance capabilities.

APPLICATION SURFACES

It is applied to the exterior and interior surfaces such as concrete, plastered walls, gypsum, lime, whitewash, and the surfaces coated with low quality plastic paint that lost its feature, aerated concrete, etc.

APPLICATION

• The surface should be strong, smooth, dry, clean and in a self- supporting condition.

• Before applying the primer, the surfaces should be sanded, crack filled, cleaned from dust and other dirt.

• ALYA PRIMER Colored can be applied by brush or roller to the surface without dilution.

• During application, the surface temperature should be between + 5 ° C and + 30 ° C.

• The surface must be protected from frost during priming process and drying times.

• Paint application should be done at least 3 hours after ALYA PRIMER Application.

• It is recommended to reduce the consumption of topcoat paint after the correction process, to increase the adhesion of the paint to the surface, to use in color changes.

• When switching from solvent-based surfaces to water-based products or when switching from synthetic painted surfaces to water-based products, the surfaces must be sanded before applying the primer.

Can be diluted with max. 10% potable water if necessary.

8-10 m²/1 liter/ 1 layer, The coverage rate may vary according to type, absorbency and structure of the surface to be applied on.

Unopened bucket can be stored for a period of 3 years in a dry and cool place without being exposed to direct sunlight and frost.
• For re use, close the bucket properly after use to avoid air penetration.

• May cause sensitivity by skin contact.  store away from children reach.

• Do not breathe vapour.

• Avoid contact with eyes and skin .  Wear suitable gloves.

• If swallowed, seek medical advice immediately.

• Dispose of this material and its container at hazardous or special waste collection point.