ALYA PRIMER-T

54

ALYA PRIMER-T

DESCRIPTION

This product is styrene acrylic emulsion resin based a surface PRIMER that is used for internal and external purposes.

PHYSICAL PROPERTIES

  • Brightness :Bright
  • Colour :Clear
  • Solid Matter :25±2% (by weight)
  • Density :1.01 gr/cm³
  • Application Tools :Roller or Brush
  • Flash Point :150°C- 200°C
ALYA PRIMER-T (Universal Primer)

PROPERTIES

ALYA PRIMER should be used in the priming process prior to any of Alya Thermal Coating systems.

• High penetration and watertightness feature.  Prevents surface absorption.

• Enhance the integration of coated material with the  surface to be coated.

•Enhance the saving in material consumption.

APPLICATION SURFACES

Concrete, aerated concrete, plaster, grouting and other raw surfaces, whitewashed surfaces, emulsion based older internal and external painted surfaces.

APPLICATION

• Before application, make sure that the surface is completely dry and cleaned of any oil, dirt, dust or sanding particles from raised areas, poorly applied plaster or screed.

• Before application, any raised, poorly plastered or unready looking areas should be sanded and any oil or dirt should be washed off with water.

• If the surface is bleeding salt, be sure to eradicate the source of the problem before application.

• ALYA PRIMER must be mixed until homogenous before application.

• ALYA PRIMER can be applied by a brush or a roller to the surface without dilution.

• During the application, the surface temperature should be between +5 °C and +35 °C and must be protected from frost during ALYA PRIMER application and drying times.

• Coating material should be applied at least 3 hours after applying the ALYA PRIMER.

• It is not recommended to dilute ALYA PRIMER with water when it is used for insulation purposes, and not to use it on Glutolin paste or solvent based PRIMER and paint.

1.2-1.3 kg/m² according to the type, absorbency and structure of the surface to be applied, controlled sample shall be performed for accurate consumption rate.

(at 20 °C, 65% HR)

  • Touch drying : 2 hour
  • Over Coating : 6-12 hours
  • Full Drying : 24 hours
  • Note : (Drying time maybe extended at ahigher
    levelofrelative humidityand lowtemperature).

2 years in its unopened package, in cool and dry place protected from frost and direct sunlight.

Alya Chemicals products are crafted within a management system that is independently certified to meet the standards of quality, environmental responsibility, and occupational health and safety as outlined in ISO 9001 and Alya Chemicals ESHQ recommendations.
The properties listed are derived from controlled laboratory tests.
®= A registered trademark of Alya Chemicals in various countries

• May cause sensitivity by skin contact.  store away from children reach.

• Do not breathe vapour.

• Avoid contact with eyes and skin .  Wear suitable gloves.

• If swallowed, seek medical advice immediately.

• Dispose of this material and its container at hazardous or special waste collection point.

This document serves as a comprehensive guide for product application,drawing upon our extensive industry expertise. Customers are required toconduct thorough testing and seek guidance for applications not explicitlycovered Usage of our products beyond specified applications withoutprior consultation with Alya Chemicals may result in potential damages,for which sole responsibility lies with the customer.

Descriptions and details are subject to change without notice,emphasizing the recipient’s obligation to uphold proprietary rights andcomply with legal regulations. Mentioning trade names does not implyendorsement. While our information portrays quality, it does notconstitute a warranty. Liability for discrepancies is acknowledged onlyin cases of intent or gross negligence. This disclaimer underscores theimportance of testing. consultation, and responsible product use,reaffirming our dedication to providing trustworthy guidance withinwell-defined responsibility parameters.