ALYA STONE–SPT

45

ALYA STONE–SPT

DESCRIPTION

A pure Acrylic resin-based, one-component, transparent, high-strength, air-drying glossy surface varnish.

PHYSICAL PROPERTIES

  • Brightness :Bright
  • Colour :Clear
  • Solid Matter :70±2% (by weight)
  • Density :0.80gr/cm³
  • Application Tools :Roller or Brush
  • Flash Point :None
ALYA STONE-SPT (Moisture Tolerant & Stain Resistant Sealer)

PROPERTIES

It has been developed to provide natural and permanent shine on all kinds of stone, natural stone, curbstones and brick surfaces.

APPLICATION SURFACES

Concrete, concrete paving, stone, natural stone..etc.

APPLICATION

• Clean surfaces from all dirt and oil grease, the surface; should be made clean, dust-free and dry.

• During the application of varnish, rainy or hot environments should be avoided, shady hours and areas that are not directly exposed to sunlight should be chosen as much as possible.

• Application should be made in conditions where the ambient temperature is 35-15 °C.

5-7  m²/L according to the type, absorbency and structure of the surface to be applied, controlled sample shall be performed for accurate consumption rate.

(at 20 °C, 65% HR)

  • Touch drying : 1 hour
  • Over Coating : 2 hours
  • Full Drying : 12 hours
  • Note : (Drying time maybe extended at ahigher
    levelofrelative humidityand lowtemperature).

2 years in its unopened package, in cool and dry place protected from frost and direct sunlight.

Alya Chemicals products are crafted within a management system that is independently certified to meet the standards of quality, environmental responsibility, and occupational health and safety as outlined in ISO 9001 and Alya Chemicals ESHQ recommendations.
The properties listed are derived from controlled laboratory tests.
®= A registered trademark of Alya Chemicals in various countries

• May cause sensitivity by skin contact.  store away from children reach.

• Do not breathe vapour.

• Avoid contact with eyes and skin .  Wear suitable gloves.

• If swallowed, seek medical advice immediately.

• Dispose of this material and its container at hazardous or special waste collection point.

This document serves as a comprehensive guide for product application,drawing upon our extensive industry expertise. Customers are required toconduct thorough testing and seek guidance for applications not explicitlycovered Usage of our products beyond specified applications withoutprior consultation with Alya Chemicals may result in potential damages,for which sole responsibility lies with the customer.

Descriptions and details are subject to change without notice,emphasizing the recipient’s obligation to uphold proprietary rights andcomply with legal regulations. Mentioning trade names does not implyendorsement. While our information portrays quality, it does notconstitute a warranty. Liability for discrepancies is acknowledged onlyin cases of intent or gross negligence. This disclaimer underscores theimportance of testing. consultation, and responsible product use,reaffirming our dedication to providing trustworthy guidance withinwell-defined responsibility parameters.