ALYA ROOF-TWP

85

ALYA ROOF-TWP

DESCRIPTION

ALYA ROOF is a modified silicone and elastomeric resin based. Used for Roofs waterproofing and thermal insulation, applied liquidly. Consists of natural vacuumed beads through applying special processes.

PHYSICAL PROPERTIES

  • Brightness :Dull
  • Colour :Any colour can be produced
  • Solid Matter :70±2% (by weight)
  • Density :0.80gr/cm³
  • Application Tools :Satin roller or spraying
  • Spraying pressure :40 Bar/580 psi
  • Nozzle Diameter :0.021"-0.027"
  • Flash Point :None
  • Single Layer Dry Film Thickness :1.5-2 mm
Alya ROOF - TWP (Waterproofing & Thermal Insulation)

PROPERTIES

It is water based material provides heat, water, sound insulation and fire resistant.

APPLICATION SURFACES

Can be applied safely and in guaranteed way for waterproofing and thermal insulation of terraces and roofs, whether surface is concrete, metal, or wood.

APPLICATION

• Ensure that the surfaces is clean and free of dirt, oil, loose and peeling paints and other foreign materials.

• All cracks, junctions, and roof leaking locations should be patched and necessary repairs or changes must be done on leaky roof.

• ALYA ROOF Insulation Coating application consists of a 4 layer application (1 layer of ALYA PRIMER, 2 layers of ALYA ROOF coating and 1 layer of ALYA PROTECT).

• Before the application ALYA ROOF, ALYA PRIMER should be applied with a brush or a roller on the surface that intended to be coated with ALYA ROOF.

• The coating application should be applied at least 2 hours after applying ALYA PRIMER layer ALYA ROOF thermal Insulation and waterproofing material shall be mixed homogeneously with a mixer or a mechanical mixer before coating application. However, the material is ready to use.

• Use satin roller for application.

• The roller must be dipped completely in the ALYA ROOF bucket and must be covered by the material completely, the excess material on the roller is spilled into the bucket by shaking.

• Apply on the surface slowly without pressing.

• Wait at least 12 hours before applying the second layer ALYA ROOF with the same technic used in the first layer.

• 24-18 hours after the second layer application, ALYA PROTECT varnish application can be applied to ensure the surface gain bright appearance and protection against all kinds of external factors.

WARNING: Do not walk on the surface for at least 48 hours after application.

1.2-1.3 kg/m² according to the type, absorbency and structure of the surface to be applied, controlled sample shall be performed for accurate consumption rate.

(at 20 °C, 65% HR)

  • Touch drying : 2 hours
  • Over Coating : 6-12 hours
  • Full Drying : 24 hours
  • Note : (Drying time maybe extended at ahigher
    levelofrelative humidityand lowtemperature).

2 years in its unopened package, in cool and dry place protected from frost and direct sunlight.

Alya Chemicals products are crafted within a management system that is independently certified to meet the standards of quality, environmental responsibility, and occupational health and safety as outlined in ISO 9001 and Alya Chemicals ESHQ recommendations.
The properties listed are derived from controlled laboratory tests.
®= A registered trademark of Alya Chemicals in various countries

• May cause sensitivity by skin contact.  store away from children reach.

• Do not breathe vapour.

• Avoid contact with eyes and skin .  Wear suitable gloves.

• If swallowed, seek medical advice immediately.

• Dispose of this material and its container at hazardous or special waste collection point.

This document serves as a comprehensive guide for product application,drawing upon our extensive industry expertise. Customers are required toconduct thorough testing and seek guidance for applications not explicitlycovered Usage of our products beyond specified applications withoutprior consultation with Alya Chemicals may result in potential damages,for which sole responsibility lies with the customer.

Descriptions and details are subject to change without notice,emphasizing the recipient’s obligation to uphold proprietary rights andcomply with legal regulations. Mentioning trade names does not implyendorsement. While our information portrays quality, it does notconstitute a warranty. Liability for discrepancies is acknowledged onlyin cases of intent or gross negligence. This disclaimer underscores theimportance of testing. consultation, and responsible product use,reaffirming our dedication to providing trustworthy guidance withinwell-defined responsibility parameters.