ALYA PIPE – RTW
- Alya Thermal
- 93
DESCRIPTION
ALYA PIPE is a clear modified acrylic and elastomeric resin based. Used for Pipe’s thermal insulation, applied liquidly. Consists of natural vacuumed silica beads through applying special processes.
PHYSICAL PROPERTIES
- Brightness :Dull
- Colour :Any colour can be produced
- Solid Matter :70±2% (by weight)
- Density :0.80gr/cm³
- Application Tools :Satin roller or spraying
- Flash Point :None
PROPERTIES
APPLICATION SURFACES
Used for energy saving in hot-cold transfer pipes of all types of materials whether metal, plastic or concrete pipes in petroleum and industrial plants.
APPLICATION
• Ensure that the surfaces is clean and free of dirt, oil, loose and peeling paints and other foreign materials.
• All cracks should be patched ALYA PIPE Insulation Coating application consists of multi layers as needed to reach the required result.
•2 layers application are the minimum (1 layer of ALYA PRIMER, 1 layer of ALYA PIPE coating) if applied by airless machine.
• 3 layers (layer of ALYA PRIMER and 2 layers of ALYA PIPE) in case of application done by Roller or Brush.
• Before the application ALYA PIPE, ALYA PRIMER should be applied by a brush or a roller on the surface that intended to be coated with ALYA PIPE.
• The coating application should be applied at least 2 hours after applying ALYA PRIMER layer.
• ALYA PIPE thermal Insulation material shall be mixed homogeneously with a mixer or a mechanical mixer before coating application. However, the material is ready to use.
• Use satin roller for application.
• The roller must be dipped completely in the ALYA PIPE bucket and must be covered by the material completely, the excess material on the roller is spilled into the bucket by shaking.
• Apply on the surface slowly without pressing.
• Wait at least 12 hours before applying the second layer ALYA PIPE with the same technic used in the first layer.
1-1.5 kg/m² according to the type, absorbency and structure of the surface to be applied, controlled sample shall be performed for accurate consumption rate.
- Touch drying : 2 hour
- Over Coating : 6-12 hours
- Full Drying : 24 hours
- Note : (Drying time maybe extended at ahigher
levelofrelative humidityand lowtemperature).
2 years in its unopened package, in cool and dry place protected from frost and direct sunlight
Alya Chemicals products are crafted within a management system that is independently certified to meet the standards of quality, environmental responsibility, and occupational health and safety as outlined in ISO 9001 and Alya Chemicals ESHQ recommendations.
The properties listed are derived from controlled laboratory tests.
®= A registered trademark of Alya Chemicals in various countries
• May cause sensitivity by skin contact.
• store away from children reach.
• Do not breathe vapour.
• Avoid contact with eyes and skin . Wear suitable gloves.
• If swallowed, seek medical advice immediately.
• Dispose of this material and its container at hazardous or special waste collection point.
This document serves as a comprehensive guide for product application,drawing upon our extensive industry expertise. Customers are required to conduct thorough testing and seek guidance for applications not explicitly covered Usage of our products beyond specified applications with out prior consultation with Alya Chemical may result in potential damages,for which sole responsibility lies with the customer.
Descriptions and details are subject to change without notice,emphasizing the recipient’s obligation to uphold proprietary rights and comply with legal regulations. Mentioning trade names does not implyendorsement. While our information portrays quality, it does notconstitute a warranty. Liability for discrepancies is acknowledged onlyin cases of intent or gross negligence. This disclaimer underscores the importance of testing. consultation, and responsible product use,reaffirming our dedication to providing trustworthy guidance within well-defined responsibility parameters.