ALYA LUX

Avatar for alyawebmasterAlyawebmaster

ALYA LUX

DESCRIPTION

Water-based acrylic resin, used as luxury final coat for indoor wall with matt finish. This product is complies with TSE- TS 5808 standard.

DRYING TIME

  • (at 20 °C, at 65% RH)
  • Touch dry time30 minutes
  • Application6 Hours
  • Hard Dry24 Hours
  • (drying time may vary in case of changes in temperature and relative humidity)
ALYA LUX

PROPERTIES

• Decorative paint.  Easy to apply.

• Has good hiding power.

• Breathability feature, environmentally- friendly.

• Provides excellent adhesion to the surfaces applied on.

• The water-repellent and vapor permeable property of its good ingredients, increases the spread capability of the paint,

• Prevent blistering and peeling off in humid environments.

APPLICATION SURFACES

ALYALUX plastic paint use for interior walls, newly or formerly-painted/plastered wall, gypsum walls, puttied surfaces, concrete, fiberglass panels, paintable wallpaper, all after the completion of proper priming works.

APPLICATION

• Surfaces must be smooth, strong, dry, clean, free of oil, dirt, dust or sanding particles, raised areas and poorly applied plaster.

• In case of application on freshly concreted or plastered surfaces, you should wait for proper sitting time of these surfaces.

• ALYA primer should be applied before the application of ALYA LUX, ALYA PRIMER should be applied as a single coat.

• ALYA LUX paint shall be carried out in a weather temperature between + 5 ° C and + 35 ° C and this temperature shall remain during the product application and drying periods. To achieve the desired texture and application convenience.

• It is recommended that satin paint roller should be used when applying on satin gypsum and putty style flat surfaces; and plastic roller should be used while applying on surfaces that are plastered, having high absorbency and flawed.

• For optimum results, a reasonable quantity shall be reserved for future retouch purposes from the same batch to avoid differences.

For brush and roller applications, it is recommended to apply as at least two coats by diluting with 15-20% clean water.

12-16m²/1 liter/ 1 layer, The coverage rate may vary according to type, absorbency and structure of the surface to be applied on.

Unopened bucket can be stored for a period of 2 years in a dry and cool place without being exposed to direct sunlight and frost.
• For re use, close the bucket properly after use to avoid air penetration.

• May cause sensitivity by skin contact.  store away from children reach.

• Do not breathe vapour.

• Avoid contact with eyes and skin .  Wear suitable gloves.

• If swallowed, seek medical advice immediately.

• Dispose of this material and its container at hazardous or special waste collection point.

ALYA ECO

Avatar for alyawebmasterAlyawebmaster

ALYA ECO

DESCRIPTION

Water-based acrylic resin, used as luxury final coat for indoor wall with matt finish. This product complies with TSE- TS 5808 standard, Based on acrylic copolymer emulsion.

DRYING TIME

  • (at 20 °C, at 65% RH)
  • Touch dry time30 minutes
  • Application6 Hours
  • Hard Dry24 Hours
  • (drying time may vary in case of changes in temperature and relative humidity)
ALYA ECO

PROPERTIES

• Easy to apply.

• Has good hiding power.

• Breathability feature, environmentally- friendly.

• Provides excellent adhesion to the surfaces applied on. Prevent blistering and peeling off in humid environments.

• Does not produce undesirable odor.

APPLICATION SURFACES

ALYAECO plastic paint use for interior walls, newly or formerly-painted/plastered wall, gypsum walls, puttied surfaces, concrete, fiberglass panels, paintable wallpaper, all after the completion of proper priming works.

APPLICATION

• Surfaces must be smooth, strong, dry, clean, free of oil, dirt, dust or sanding particles, raised areas and poorly applied plaster.

• In case of application on freshly concreted or plastered surfaces, you should wait for proper sitting time of these surfaces.

• ALYA PRIMER should be applied before the application of ALYA ECO, ALYA PRIMER should be applied as a single coat.

• ALYA ECO paint shall be carried out in a weather temperature between + 5 ° C and + 35 ° C and this temperature shall remain during the product application and drying periods. To achieve the desired texture and application convenience.

• It is recommended that satin paint roller should be used when applying on satin gypsum and putty style flat surfaces; and plastic roller should be used while applying on surfaces that are plastered, having high absorbency and flawed.

• For optimum results, a reasonable quantity shall be reserved for future retouching purposes from the same batch to avoid differences. The product can be applied by Roller, Spray, Brush.

For brush and roller applications, it is recommended to apply as at least two coats by diluting with 15-20% clean water.

9-12 m²/1 liter/ 1 layer, The coverage rate may vary according to type, absorbency and structure of the surface to be applied on.

Unopened bucket can be stored for a period of 2 years in a dry and cool place without being exposed to direct sunlight and frost.
• For re use, close the bucket properly after use to avoid air penetration.

• May cause sensitivity by skin contact.  store away from children reach.

• Do not breathe vapour.

• Avoid contact with eyes and skin .  Wear suitable gloves.

• If swallowed, seek medical advice immediately.

• Dispose of this material and its container at hazardous or special waste collection point.

ALYA PIPE – RTW

Avatar for alyawebmasterAlyawebmaster

ALYA PIPE – RTW

DESCRIPTION

ALYA PIPE is a clear modified acrylic and elastomeric resin based. Used for Pipe’s thermal insulation, applied liquidly. Consists of natural vacuumed silica beads through applying special processes.

PHYSICAL PROPERTIES

  • Brightness :Dull
  • Colour :Any colour can be produced
  • Solid Matter :70±2% (by weight)
  • Density :0.80gr/cm³
  • Application Tools :Satin roller or spraying
  • Flash Point :None
ALYA PIPE-RTW (Thermal Insulation & Rust Proof)

PROPERTIES

It is water based material provides heat, insulation and fire resistant.

APPLICATION SURFACES

Used for energy saving in hot-cold transfer pipes of all types of materials whether metal, plastic or concrete pipes in petroleum and industrial plants.

APPLICATION

• Ensure that the surfaces is clean and free of dirt, oil, loose and peeling paints and other foreign materials.

• All cracks should be patched ALYA PIPE Insulation Coating application consists of multi layers as needed to reach the required result.

•2 layers application are the minimum (1 layer of ALYA PRIMER, 1 layer of ALYA PIPE coating) if applied by airless machine.

• 3 layers (layer of ALYA PRIMER and 2 layers of ALYA PIPE) in case of application done by Roller or Brush.

• Before the application ALYA PIPE, ALYA PRIMER should be applied by a brush or a roller on the surface that intended to be coated with ALYA PIPE.

• The coating application should be applied at least 2 hours after applying ALYA PRIMER layer.

• ALYA PIPE thermal Insulation material shall be mixed homogeneously with a mixer or a mechanical mixer before coating application. However, the material is ready to use.

• Use satin roller for application.

• The roller must be dipped completely in the ALYA PIPE bucket and must be covered by the material completely, the excess material on the roller is spilled into the bucket by shaking.

• Apply on the surface slowly without pressing.

• Wait at least 12 hours before applying the second layer ALYA PIPE with the same technic used in the first layer.

1-1.5 kg/m² according to the type, absorbency and structure of the surface to be applied, controlled sample shall be performed for accurate consumption rate.

  • Touch drying : 2 hour
  • Over Coating : 6-12 hours
  • Full Drying : 24 hours
  • Note : (Drying time maybe extended at ahigher
    levelofrelative humidityand lowtemperature).

2 years in its unopened package, in cool and dry place protected from frost and direct sunlight

Alya Chemicals products are crafted within a management system that is independently certified to meet the standards of quality, environmental responsibility, and occupational health and safety as outlined in ISO 9001 and Alya Chemicals ESHQ recommendations.
The properties listed are derived from controlled laboratory tests.
®= A registered trademark of Alya Chemicals in various countries

• May cause sensitivity by skin contact.  

• store away from children reach.

• Do not breathe vapour.

• Avoid contact with eyes and skin .  Wear suitable gloves.

• If swallowed, seek medical advice immediately.

• Dispose of this material and its container at hazardous or special waste collection point.

This document serves as a comprehensive guide for product application,drawing upon our extensive industry expertise. Customers are required to conduct thorough testing and seek guidance for applications not explicitly covered Usage of our products beyond specified applications with out prior consultation with Alya Chemical may result in potential damages,for which sole responsibility lies with the customer.

Descriptions and details are subject to change without notice,emphasizing the recipient’s obligation to uphold proprietary rights and comply with legal regulations. Mentioning trade names does not implyendorsement. While our information portrays quality, it does notconstitute a warranty. Liability for discrepancies is acknowledged onlyin cases of intent or gross negligence. This disclaimer underscores the importance of testing. consultation, and responsible product use,reaffirming our dedication to providing trustworthy guidance within well-defined responsibility parameters.